Double Wire Hose Clips from Digital Isle Limited http://www.digitalisle.co.uk/rss/1/productlistings/double-wire-hose-clips/cat185 <h2><span style="font-size: 12px;">Stainless Steel Double Wire Hose Clips</span></h2> <p><span style="font-size: 12px;">Double wire hose clips are designed for compatible spiral, corrugated and reinforced hoses. The two parallel wires can sit on either side of the raised hose helix, while the screw mechanism reduces the clamp diameter around the connection.</span></p> <p><span style="font-size: 12px;">This construction makes double wire clips a useful alternative to flat-band worm-drive clips where the hose profile suits the twin-wire design. They are not a universal replacement for every hose clamp: the correct choice depends on the hose construction, outside diameter, fitting, operating conditions and required clamping performance.</span></p> <h2><span style="font-size: 12px;">Double Wire Clips from 13mm to 200mm</span></h2> <p><span style="font-size: 12px;">Our range is divided into two product families. Together they cover smaller 13-80mm hose connections and larger 85-200mm applications. Because there is a gap between the two ranges, always check the actual selectable sizes rather than assuming that every diameter between 13mm and 200mm is available.</span></p> <h3><span style="font-size: 12px;">13-80mm Double Wire Hose Clips</span></h3> <p><span style="font-size: 12px;">The smaller clips are suitable for selected soft and semi-rigid hoses with spiral or braided reinforcement. Typical uses include flexible pond hose, irrigation equipment, agricultural applications, domestic appliances and selected automotive or general industrial connections.</span></p> <p><span style="font-size: 12px;">These clips are listed as W4 stainless steel. Wire diameter varies across the available clip sizes, so check the individual product specification before ordering.</span></p> <h3><span style="font-size: 12px;">85-200mm Large Double Wire Clamps</span></h3> <p><span style="font-size: 12px;">The larger clamps are intended for compatible large-diameter spiral hose used in ducting, heating and ventilation applications. Their larger fastener and support plate distinguish them from the smaller double wire clips.</span></p> <p><span style="font-size: 12px;">The current large-clamp range is specified as SS304 stainless steel. Confirm the selected adjustment range and hose compatibility before installation, particularly where pressure, vibration, temperature or environmental exposure may be relevant.</span></p> <h2><span style="font-size: 12px;">How to Select the Correct Size</span></h2> <ol> <li><span style="font-size: 12px;">Fit the hose over its connector, pipe or hose-tail fitting before measuring.</span></li> <li><span style="font-size: 12px;">Measure the complete outside diameter of the assembled hose at the intended clamp position.</span></li> <li><span style="font-size: 12px;">Choose a clip whose stated adjustment range contains that measurement.</span></li> <li><span style="font-size: 12px;">Check that the two wires align correctly with the profile of the spiral or corrugated hose.</span></li> <li><span style="font-size: 12px;">Confirm the material, wire diameter, fastener dimensions and pack quantity shown for the selected option.</span></li> <li><span style="font-size: 12px;">Tighten according to the hose, fitting and equipment instructions without crushing or distorting the hose.</span></li> </ol> <p><span style="font-size: 12px;">Do not select a clip using the hose's nominal internal diameter unless the product instructions specifically require it. The clamp must fit around the outside of the assembled hose and connector.</span></p> <h2><span style="font-size: 12px;">Common Applications</span></h2> <ul> <li><span style="font-size: 12px;">Flexible pond and filtration hose</span></li> <li><span style="font-size: 12px;">Spiral and corrugated hose connections</span></li> <li><span style="font-size: 12px;">Irrigation and agricultural equipment</span></li> <li><span style="font-size: 12px;">Selected automotive hose connections</span></li> <li><span style="font-size: 12px;">Domestic appliances and general equipment</span></li> <li><span style="font-size: 12px;">Large ducting and extraction hose</span></li> <li><span style="font-size: 12px;">Heating and ventilation hose</span></li> </ul> <p><span style="font-size: 12px;">These are general application categories, not universal suitability claims. Check the specification of the exact clip alongside the hose manufacturer's requirements.</span></p> <h2><span style="font-size: 12px;">Double Wire Clips or Worm-Drive Hose Clips?</span></h2> <p><span style="font-size: 12px;">Double wire clips are shaped to work with compatible profiled hose, allowing the wires to sit around the raised helix. A conventional worm-drive clip uses a flat metal band and is commonly selected for smooth-wall hose and general-purpose connections.</span></p> <p><span style="font-size: 12px;">The hose profile should determine the clamp style. Do not assume that one type will provide an adequate connection simply because its diameter range fits.</span></p> <h2><span style="font-size: 12px;">Material and Installation Checks</span></h2> <p><span style="font-size: 12px;">The two current product families use stainless steel constructions, but their published specifications are not identical. The smaller range is described as W4 stainless steel, while the larger range is described as SS304. Check the exact product rather than applying one specification to the entire department.</span></p> <p><span style="font-size: 12px;">Stainless steel construction does not automatically establish suitability for every chemical, marine, food, high-temperature or high-pressure application. These properties must be verified for the exact clip, hose and operating environment.</span></p> <p><span style="font-size: 12px;">Inspect the connection after installation and during routine maintenance. Replace any clip showing damage, severe corrosion, deformation, a damaged fastener or an inability to maintain the required connection.</span></p> <h2><span style="font-size: 12px;">Related Hose Clamps</span></h2> <ul> <li><span style="font-size: 12px;">Browse the complete <a href="/diy-fixings-c32/hose-clamps-c34">hose clamps and hose clips range</a>.</span></li> <li><span style="font-size: 12px;">Choose <a href="/diy-fixings-c32/hose-clamps-c34/standard-hose-clips-c119">standard hose clips</a> for compatible general-purpose and smooth-wall hose connections.</span></li> <li><span style="font-size: 12px;">Compare <a href="/diy-fixings-c32/hose-clamps-c34/t-bolt-clamps-c118">T-bolt clamps</a> for suitable larger or more demanding applications.</span></li> <li><span style="font-size: 12px;">View <a href="/diy-fixings-c32/hose-clamps-c34/high-torque-clips-c126">high-torque hose clamps</a> where documented higher clamping performance is required.</span></li> <li><span style="font-size: 12px;">Find compatible installation products in our <a href="/diy-fixings-c32/hose-clamps-c34/tools-c130">hose clamp tools</a> department.</span></li> </ul> <h2><span style="font-size: 12px;">Frequently Asked Questions</span></h2> <h3><span style="font-size: 12px;">What is a double wire hose clip?</span></h3> <p><span style="font-size: 12px;">It is a screw-adjusted clamp formed from two parallel wires. The design is commonly used with compatible spiral or corrugated hose because the wires can sit around the raised hose profile.</span></p> <h3><span style="font-size: 12px;">How do I measure for a double wire hose clip?</span></h3> <p><span style="font-size: 12px;">Fit the hose over its connector and measure the outside diameter at the intended clamp position. Select a listed adjustment range that contains this measurement.</span></p> <h3><span style="font-size: 12px;">Can double wire clips be used with pond hose?</span></h3> <p><span style="font-size: 12px;">The smaller 13-80mm range includes options intended for compatible flexible pond and spiral hose. Check the exact hose diameter, construction and selected clip size before ordering.</span></p> <h3><span style="font-size: 12px;">Which clamps are suitable for large ducting hose?</span></h3> <p><span style="font-size: 12px;">The 85-200mm product family is intended for compatible large spiral hose used in ducting, heating and ventilation applications. Confirm the exact adjustment range and operating requirements.</span></p> <h3><span style="font-size: 12px;">Are double wire hose clips suitable for high-pressure applications?</span></h3> <p><span style="font-size: 12px;">Not automatically. The smaller current range is presented for low-pressure applications, and the department does not establish a universal pressure rating. Verify the required pressure performance for the exact hose, fitting and clamp.</span></p> <h3><span style="font-size: 12px;">Are all the clips made from the same stainless steel grade?</span></h3> <p><span style="font-size: 12px;">No single grade should be assumed across the department. The smaller range is currently described as W4 stainless steel, while the larger clamps are described as SS304 stainless steel.</span></p> Copyright 2026 Digital Isle Limited en Fri, 09 Oct 2026 13:43:10 +0100 Fri, 09 Oct 2026 13:43:10 +0100 Fri, 09 Oct 2026 13:43:10 +0100 Boltza® Stainless Steel Double Wire Hose Clips for Pond & Spiral Hose 13-80mm Boltza® Stainless Steel Double Wire Hose Clips for Pond &amp; Spiral Hose 13-80mm

Boltza® Stainless Steel Double Wire Hose Clips for Pond &amp; Spiral Hose 13-80mm

Designed for profiled hose: The twin round wires sit on either side of the raised helix on compatible spiral, corrugated and reinforced hose. Sixteen adjustment ranges: Choose from sizes covering outside hose diameters from 13mm to 80mm. W4 stainless steel construction: Suitable for compatible connections where resistance to moisture and general environmental exposure is required. Screw-adjusted fit: The threaded fastener allows the clip to be tightened around the assembled hose and connector. Flexible pack quantities: Every available size can be ordered individually or in packs of 4 or 10.

/diy-fixings-c32/hose-clamps-c34/double-wire-hose-clips-c185/boltza-stainless-steel-double-wire-hose-clips-for-pond-spiral-hose-13-80mm-p3737 /diy-fixings-c32/hose-clamps-c34/double-wire-hose-clips-c185/boltza-stainless-steel-double-wire-hose-clips-for-pond-spiral-hose-13-80mm-p3737 Fri, 09 Oct 2026 08:08:09 +0100 Double Wire Screw Hose Clamp Stainless Steel for Ducting & Heating & Ventilation Double Wire Screw Hose Clamp Stainless Steel for Ducting &amp; Heating &amp; Ventilation

Double Wire Screw Hose Clamp Stainless Steel for Ducting &amp; Heating &amp; Ventilation

Large Double Wire Clamps From 85mm to 200mm These clamps give excellent sealing capacity. In addition, the clamp is made to give an around the seal for almost two coils ensuring minimum leak paths. A wire hose clamp is a double ring that can fix a pressure or suction hose to a hose pillar fitting. They are suitable for the fastening of spiral hoses. It is crucial to select a hose clamp with the proper diameter. We offer robust hose clamps from galvanized steel or stainless steel.

 /diy-fixings-c32/hose-clamps-c34/double-wire-hose-clips-c185/double-wire-screw-hose-clamp-stainless-steel-for-ducting-heating-ventilation-p3775 /diy-fixings-c32/hose-clamps-c34/double-wire-hose-clips-c185/double-wire-screw-hose-clamp-stainless-steel-for-ducting-heating-ventilation-p3775