Tools from Digital Isle Limited http://www.digitalisle.co.uk/rss/1/productlistings/tools/cat130 <h2>Hose Clamp Tools for Accurate Installation</h2> <p>Using the correct hose clamp tool makes installation quicker and reduces the risk of damaging the screw head, clamp, hose or fitting. This category includes tools for tightening worm-drive hose clips, closing ear clamps and CV-boot bands, and installing Jubilee® Flexiband stainless steel banding.</p> <p>These tools are designed for different fastening systems and are not universally interchangeable. Identify the clamp type and fastening method before selecting a driver or pincer.</p> <h2>Which Hose Clamp Tool Do You Need?</h2> <h3>7mm Flexible Hose Clip Driver</h3> <p>The <a href="/diy-fixings-c32/hose-clamps-c34/flexidriver-screw-driver-for-clamps-and-clips-for-7mm-hex-p3000">Jubilee® Flexidriver</a> has a flexible shaft that helps reach clip screws positioned behind pipes, hoses or other components. Its socket fits 7mm across-flat hexagonal screw heads.</p> <p>It is suitable for compatible Jubilee® Original Range clips and other clamps fitted with the same 7mm hexagonal head. Compatibility must be confirmed separately for High Torque, T-bolt, Superclamp and specialist clamp designs.</p> <h3>Rigid Jubilee® Clip Driver</h3> <p>The <a href="/diy-fixings-c32/hose-clamps-c34/clip-driver-hexagonal-95mm-3-3-4in-p3232">Jubilee® CDR95 clip driver</a> is a rigid 95mm driver with a 7mm hexagonal socket and T-style handle. It is suited to accessible installations where a straight driver provides direct engagement with the clip screw.</p> <p>Choose the flexible driver for obstructed positions and the rigid driver where the clamp screw can be reached directly. Neither tool is torque-limiting, so the installer must follow the specified tightening torque for the selected clip and application.</p> <h3>O-Clip and CV-Boot Pincers</h3> <p>Ear clamps are closed by compressing their raised ear rather than turning a screw. The <a href="/diy-fixings-c32/hose-clamps-c34/jubilee-side-closing-pincer-p3231">Jubilee® P1099 side-closing pincer</a> is designed for Jubilee® O-clips and compatible Jubilee® constant-velocity boot clips.</p> <p>Side-closing pincers are especially useful where direct end access to the clamp ear is restricted. The range also includes <a href="/diy-fixings-c32/hose-clamps-c34/cv-boot-clips-accesories-c166/ear-o-clip-pliers-clamping-cv-boot-coolant-air-hydraulic-hose-pincers-tool-p3748">ear O-clip and CV-boot clamping pliers</a> for compatible automotive, coolant, air and hydraulic hose clamps.</p> <p>Before crimping, confirm that the pincer jaws match the clamp-ear design. A worm-drive clip driver cannot close an ear clamp, while ear-clamp pincers must not be used to tighten screw-operated clips.</p> <h3>Jubilee® Flexiband Installation Tool</h3> <p>The <a href="/diy-fixings-c32/hose-clamps-c34/jubilee-flexiband-sign-installation-tool-stainless-steel-a2-304-p3214">Jubilee® Flexiband installation tool</a> is a specialist operating tool for assembling the Jubilee® stainless steel band-and-buckle system. It is compatible with 9mm, 13mm, 16mm and 19mm Jubilee® Flexiband.</p> <p>This system is commonly used for sign fixing and other industrial banding applications where continuous stainless steel band is cut to the required length. It should not be confused with screw-operated Jubilee® Multiband or conventional worm-drive hose clips.</p> <h2>Driver or Pincer: Understanding the Difference</h2> <ul> <li><strong>Flexible 7mm driver:</strong> for compatible hex-headed clip screws in obstructed or difficult-to-reach positions.</li> <li><strong>Rigid 7mm driver:</strong> for direct access to compatible worm-drive clip screws.</li> <li><strong>Side-closing pincer:</strong> for crimping compatible O-clips and CV-boot clamp ears from the side.</li> <li><strong>Ear-clamp pliers:</strong> for closing compatible single-ear, double-ear and automotive boot clamps.</li> <li><strong>Flexiband tool:</strong> for tensioning and securing Jubilee® stainless steel Flexiband with the correct buckle.</li> </ul> <h2>Using a Hose Clip Driver Correctly</h2> <p>Position the driver socket fully over the hexagonal screw head before applying force. Tighten the clip evenly and follow the recommended torque for the exact clamp, hose and fitting. Stop if the housing twists, the band deforms or the screw begins to slip.</p> <p>A dedicated 7mm socket driver generally provides better engagement than using a poorly fitting flat screwdriver. However, the tool does not determine the correct torque automatically and cannot compensate for an incorrectly sized or unsuitable clamp.</p> <p>Browse compatible <a href="/diy-fixings-c32/hose-clamps-c34/jubilee-original-hose-clips-worm-drive-clamps-c117">Original Jubilee® worm-drive hose clips</a>.</p> <h2>Installing Ear Clamps and CV-Boot Clips</h2> <p>Place the clamp squarely around the hose or boot and confirm its position before closing the ear. Align the pincer jaws correctly and compress the ear progressively until the clamp is securely fitted according to the product instructions.</p> <p>Ear clamps normally undergo permanent deformation during installation and should not automatically be reused after removal. Browse our <a href="/diy-fixings-c32/hose-clamps-c34/double-ear-hose-clamps-c124">ear hose clamps</a> and <a href="/diy-fixings-c32/hose-clamps-c34/cv-boot-clips-accesories-c166">CV-boot clips and accessories</a>.</p> <h2>Frequently Asked Questions</h2> <h3>Does the Flexidriver fit every Jubilee® clamp?</h3> <p>No. It fits screws with a 7mm across-flat hexagonal head. Check the fastening specification of the exact clamp before use.</p> <h3>Does a hose clip driver control the tightening torque?</h3> <p>No. The Flexidriver and CDR95 are manual drivers, not calibrated torque tools. The installer remains responsible for applying the correct torque.</p> <h3>Can ordinary pliers be used on O-clips?</h3> <p>A dedicated ear-clamp pincer is recommended because its jaws are designed to close the clamp ear in a controlled manner. General-purpose pliers may deform the ear unevenly or damage the clamp.</p> <h3>Can the Flexiband tool install Multiband hose clamps?</h3> <p>No. Jubilee® Flexiband is a band-and-buckle system, while Multiband uses separate screw housings. Each system requires the appropriate installation method.</p> <h3>Are CV-boot clamp tools universal?</h3> <p>No. CV-boot clamps use different fastening arrangements, including raised ears and fold-over or tensioned bands. Match the tool to the exact clamp design before installation.</p> Copyright 2026 Digital Isle Limited en Fri, 09 Oct 2026 08:08:08 +0100 Fri, 09 Oct 2026 08:08:08 +0100 Fri, 09 Oct 2026 08:08:08 +0100 Clip Driver - Hexagonal 95mm (3.3/4in) Clip Driver - Hexagonal 95mm (3.3/4in)

Clip Driver - Hexagonal 95mm (3.3/4in)

High precision tools specifically designed for efficient, rapid and easy adjustment of Jubilee® Clips to their optimum torque. The Clip driver has a rigid shaft with a 7mm socket driver and is 95mm in length. SpecificationsWeight: 0.08 kgDimensions: 95 x 80 x 12

 /diy-fixings-c32/hose-clamps-c34/tools-c130/clip-driver-hexagonal-95mm-3-3-4in-p3232 /diy-fixings-c32/hose-clamps-c34/tools-c130/clip-driver-hexagonal-95mm-3-3-4in-p3232 Thu, 08 Oct 2026 01:41:58 +0100 Ear O Clip Pliers Clamping CV Boot Coolant Air Hydraulic Hose Pincers Tool Ear O Clip Pliers Clamping CV Boot Coolant Air Hydraulic Hose Pincers Tool

Ear O Clip Pliers Clamping CV Boot Coolant Air Hydraulic Hose Pincers Tool

On1shelf® Ear O Clip Pliers Clamping CV Boot Coolant Air Hydraulic Hose Pincers Tool 10 Inch ( 26cm ) pliers Soft grip 6 Inch ( 16cm ) PVC dipped handle for easy, comfortable use Suitable for installation of specific clamps on fuel filters, water pumps and other cooling system hoses Made From Chrome - Vanadium Steel A slim head permits good accessibility in confined areas.

/diy-fixings-c32/hose-clamps-c34/tools-c130/ear-o-clip-pliers-clamping-cv-boot-coolant-air-hydraulic-hose-pincers-tool-p3748 /diy-fixings-c32/hose-clamps-c34/tools-c130/ear-o-clip-pliers-clamping-cv-boot-coolant-air-hydraulic-hose-pincers-tool-p3748 Wed, 07 Oct 2026 22:51:26 +0100 FLEXIDRIVER Screw Driver for CLAMPS AND CLIPS for 7mm HEX FLEXIDRIVER Screw Driver for CLAMPS AND CLIPS for 7mm HEX

FLEXIDRIVER Screw Driver for CLAMPS AND CLIPS for 7mm HEX

With a comfortable handle and flexible shaft, the Jubilee® Flexidriver is designed to allow you to access hard to reach Jubilee® clips to adjust them back to their optimum torque and manufactured to enable high precision, rapid adjustments of clips under challenging locations and awkward places. The socket is suitable to fit any 7mm across flat hexagonal headed screw.

 /diy-fixings-c32/hose-clamps-c34/tools-c130/flexidriver-screw-driver-for-clamps-and-clips-for-7mm-hex-p3000 /diy-fixings-c32/hose-clamps-c34/tools-c130/flexidriver-screw-driver-for-clamps-and-clips-for-7mm-hex-p3000 Wed, 12 Aug 2026 10:46:21 +0100 Jubilee Flexiband Sign Installation Tool Stainless Steel A2 304 Jubilee Flexiband Sign Installation Tool Stainless Steel A2 304

Jubilee Flexiband Sign Installation Tool Stainless Steel A2 304

Type: Installation&nbsp;Tool Compatible With: 9mm, 13mm, 16mm and 19mm Flexiband Material: Stainless Steel A2 304 Quantity: 1

 /diy-fixings-c32/hose-clamps-c34/tools-c130/jubilee-flexiband-sign-installation-tool-stainless-steel-a2-304-p3214 /diy-fixings-c32/hose-clamps-c34/tools-c130/jubilee-flexiband-sign-installation-tool-stainless-steel-a2-304-p3214 Tue, 18 Aug 2026 20:11:11 +0100 Jubilee® Side Closing Pincer Jubilee® Side Closing Pincer

Jubilee® Side Closing Pincer

Side closing pincer for use with Jubilee®&nbsp;&lsquo;O&rsquo; Clips or Jubilee constant velocity (CV) boot clips. Part number:&nbsp;P1099Range:&nbsp;'O' Clips, ToolsMaterial:&nbsp;Mild Steel&nbsp;

 /diy-fixings-c32/hose-clamps-c34/tools-c130/jubilee-side-closing-pincer-p3231 /diy-fixings-c32/hose-clamps-c34/tools-c130/jubilee-side-closing-pincer-p3231 Mon, 14 Sep 2026 11:06:16 +0100 Professional 2-Piece CV Joint Boot Clamp Pliers Set – Heavy-Duty Hose Banding Tool Kit with Cut-Off Pliers Professional 2-Piece CV Joint Boot Clamp Pliers Set – Heavy-Duty Hose Banding Tool Kit with Cut-Off Pliers

Professional 2-Piece CV Joint Boot Clamp Pliers Set – Heavy-Duty Hose Banding Tool Kit with Cut-Off Pliers

Superior Quality Construction: Boltza®'s 2-piece CV, joint plier set, is made of pressed steel with a black-coated finish, ensuring durability and dependable performance. Quick &amp; Effective Usage: With a built-in cutter and winding mechanism, this set guarantees efficient tightening and cutting of strapping, optimizing your time and effort. Ergonomic Comfort Handles: The non-slip rubber handles, including a 4.25-inch plastic handle with extended rubber grips, ensure user comfort and minimize fatigue during operations. Multipurpose Applications: Perfect for crimping and flattening ear-type CV joint boot clamps and ideal for ear hose clamps on fuel lines, cooling systems, and vacuum hoses. Comprehensive Kit: This set comes with 1 CV Clamp Tool and 1 CV Joint Boot Clamp Pliers, offering a complete solution for professional automotive maintenance and repairs.

/diy-fixings-c32/hose-clamps-c34/tools-c130/professional-2-piece-cv-joint-boot-clamp-pliers-set-heavy-duty-hose-banding-tool-kit-with-cut-off-pliers-p4549 /diy-fixings-c32/hose-clamps-c34/tools-c130/professional-2-piece-cv-joint-boot-clamp-pliers-set-heavy-duty-hose-banding-tool-kit-with-cut-off-pliers-p4549