VELCRO® Brand ONE-WRAP® Black 50mm Back-to-Back Tape

This genuine VELCRO® Brand ONE-WRAP® fastener provides an adjustable and reusable solution for cable management, wire harnessing, equipment organisation and general bundling. The broad 50mm width offers more coverage than narrow cable straps, making it suitable for larger bundles and bulky items.

The tape has a low-profile Hook surface on one side and a knitted Loop surface on the reverse. It wraps around the bundle and fastens directly onto itself, so no adhesive, buckle, fixing tool or separate mating component is required.

Available length options

1m: Suitable for individual projects and shorter custom straps
2m: Useful for larger bundles and multiple cut lengths
5m: Suitable for workshop, installation and maintenance work
10m: Practical for repeated commercial and professional applications
25m full roll: Suitable for production, large installations and frequent use

Typical applications include:

Electrical cables and large wiring looms
Data-centre and network installations
Audiovisual and telecommunications equipment
Automotive interiors and vehicle wiring
Tools, hoses and equipment storage
Workshop, warehouse and maintenance organisation

How to use

Cut the tape to the required length using suitable scissors. Wrap it around the cable bundle or item, overlap the material and press the Hook side firmly against the Loop surface on the reverse.

To adjust the bundle, peel the fastening open, reposition the tape and secure it again. Unlike a conventional single-use plastic cable tie, ONE-WRAP® tape can be reopened without cutting, making cable additions, maintenance and equipment changes easier.

The soft, flexible construction helps distribute pressure across the cable bundle rather than concentrating force at a narrow point. Do not overtighten around delicate data cables, fibre-optic lines or soft hoses.

Important application information

The standard ONE-WRAP® 229 product is low smoke and zero halogen but is not the dedicated flame-retardant version. Do not use it where certified flame-retardant or plenum-rated fastening is required.

Prolonged direct ultraviolet exposure is not recommended. Long-term exposure to water or humidity above 80% RH may temporarily reduce mechanical performance, although performance is normally recovered after drying.

Test the product within the finished installation where chemicals, fuels, oils, electrostatic discharge or safety-critical performance may be a concern. Do not use for lifting, personal restraint, overhead safety support or where fastening failure could cause injury or serious damage.

Brand	VELCRO® Brand
Product range	ONE-WRAP® 229
Product type	Reusable self-engaging back-to-back fastening tape
Construction	Extruded Hook on knitted fabric backing
Material composition	Polypropylene Hook with polyamide knitted fabric
Colour	Black
Width	50mm
Available lengths	1m, 2m, 5m, 10m and 25m full roll
Adhesive backing	None
Overall thickness	1.05–1.65mm
Material weight	550g/m² ±11%
Reference peel performance	Minimum 0.4N/cm; average 2.0N/cm under the stated EN 12242 test method
Reference shear performance	Minimum 7N/cm²; average 40N/cm² under the stated EN 13780 test method
Reference tensile strength	Minimum 120N/cm; average 180N/cm under the stated EN ISO 13934-1 test method
Cycle-life reference	Retains 50% of the stated minimum performance after 100 opening and closing cycles
Low-smoke compliance	Complies with ICEA-T-33-655 optical-density requirements
Zero-halogen compliance	Complies with EN 50306-1, Point 3.3
Textile certification	OEKO-TEX® STANDARD 100 Class I
UV resistance	Not recommended for prolonged direct exposure to ultraviolet light
Fire classification	Standard version is not flame-retardant