Jubilee® Original Range Mild Steel Hose Clips

The Jubilee® Original Range is a proven selection of adjustable worm-drive hose clips designed for everyday hose joining and pipe-clamping work. Manufactured from zinc-protected mild steel, these clips offer a practical balance of clamping performance, adjustability and corrosion protection for automotive, agricultural, industrial and household applications.

The continuously threaded band provides flexible diameter adjustment throughout the stated size range. Tightening the 7mm across-flats screw draws the band evenly around the hose, helping secure it against a compatible pipe, connector or fitting. The smooth internal profile and rolled band edges are designed to reduce damage to rubber, silicone and other softer hose materials.

Choosing the correct size

Measure the outside diameter of the hose after it has been positioned over the pipe or fitting. Select a clip whose adjustment range contains that measurement, ideally with the hose diameter positioned near the middle of the available range. Do not select a clip based only on the internal diameter of an uninstalled hose.

Typical uses include:

Vehicle coolant, ventilation and general-purpose hose connections
Garden hoses, irrigation lines and agricultural machinery
Pneumatic and suitable hydraulic equipment
Household plumbing, drainage and appliance hoses
Workshop repairs, machinery maintenance and construction work

The correct tightening torque and pressure rating depend on the selected clip diameter. Avoid overtightening, as excessive torque may damage the hose, fitting or clamp. For marine, food-processing or highly corrosive environments, a suitable stainless steel Jubilee® clip should be selected instead.

Brand: Jubilee®
Product range: Original Range
Clamp type: Worm-drive hose clip
Material classification: W1 mild steel
Surface protection: Zinc protected / zinc plated
Adjustment range: 9.5–318mm across the available size options
Band width: 9.3mm for 9.5–12mm, 11–16mm and 13–20mm clips; 12.7mm for the remaining sizes
Band thickness: 0.7mm or 0.9mm, depending on the selected size
Fastening: 7mm across-flats screw head
Corrosion testing: 240-hour neutral salt spray test
Standards: Made to BS 5315; meets DIN 3017-1 and SS 2298 requirements; conforms to SAE J1508 Type FE
Recommended torque: Size dependent; refer to the technical data for the selected clip
Maximum torque: Size dependent; do not exceed the stated value for the selected clip
Typical applications: Automotive hoses, cooling systems, irrigation, farm machinery, pneumatic equipment, hydraulic installations, plumbing, construction and DIY
Pack quantity: Supplied as stated within the selected product option