Jubilee® Original Range Hose Clips for Corrosive Environments

These adjustable worm drive clips are intended for hose connections used in marine, offshore, industrial and other demanding environments. Their compact design makes them suitable for securing compatible flexible hoses to pipes, connectors, pumps and hose tails.

Selecting the Correct Size

Fit the hose over its connector and measure the outside diameter of the assembled connection. Select a clip range that includes this measurement, preferably without placing the connection at the extreme minimum or maximum adjustment point.

Installation

Position the clip over the section of hose covering the connector or hose tail. Tighten it evenly using a suitable driver and follow the recommended torque for the selected Jubilee® clip size. Avoid overtightening, particularly on soft hoses or plastic fittings.

Pack Contents

One genuine Jubilee® Original Range hose clip is supplied in the size selected from the product options.

Brand	Jubilee®
Product Range	Original Range
Product Type	Adjustable worm drive hose clip
Material	316 stainless steel, also known as 18/10, A4 or HNSS
Construction	Continuously threaded band with rolled edges and a smooth internal profile
Fastening	Slotted 7 mm A/F worm drive screw
Band Width	9.3 mm or 12.7 mm depending on the selected clip size
Band Thickness	0.7 mm or 0.9 mm depending on the selected clip size
Clamping Diameter	According to the selected product variation
Corrosion Testing	2,000-hour neutral salt-spray test to BS EN ISO 9227
Standards	BS 5315, DIN 3017-1, SS 2298 and SAE J1508 Type FE
Approval	Lloyd’s Register approved for marine, offshore and industrial applications
Suitable Hose Materials	Compatible rubber, silicone and reinforced flexible hoses
Quantity Supplied	One hose clip in the selected size