Compact Clips for Small-Bore Hose Connections

Jubilee® Junior hose clips provide a compact fastening solution for compatible fuel pipes, heater hoses and other small-bore hose connections used in low-pressure systems.

Selecting the Correct Clip

Measure the outside diameter of the hose after it has been fitted over the pipe, connector or hose tail. Choose a clamp that fits the assembled connection without positioning it at the extreme end of its adjustment range.

Installation

Position the clip over the section of hose covering the fitting. Tighten the screw evenly using a suitable 7 mm tool until the hose is held securely. Avoid overtightening, particularly when working with soft hose materials or plastic connectors.

Application Note

These clips are intended for compatible low-pressure, small-bore hose applications. Use a suitably rated clamp where the system involves higher pressure, safety-critical equipment or specialist certification requirements.

Brand	Jubilee®
Product Range	Jubilee® Junior
Product Type	Mini nut and bolt hose clip
Material	Mild steel
Finish	Zinc plated
Available Clamping Ranges	7–9 mm, 8–10 mm, 9–11 mm, 10–12 mm, 11–13 mm, 12–14 mm, 13–15 mm, 14–16 mm, 15–17 mm, 16–18 mm and 18–20 mm
Band Width	9 mm
Band Thickness	0.6 mm
Recommended Tightening Torque	1.5 Nm
Maximum Tightening Torque	2 Nm
Fastening	7 mm A/F screw
Corrosion Testing	72-hour neutral salt-spray test to BS EN ISO 9227
Pack Quantity	According to the selected product option