Jubilee® Light Range Zinc-Protected Mild Steel Hose Clips

Jubilee® Light Range hose clips provide adjustable worm-drive clamping in installations where a narrower and lighter clip is preferable to a standard-width hose clamp. They are particularly well suited to automotive work, compact machinery, agricultural equipment and general maintenance applications where installation space is limited.

The continuously threaded band allows the clamp diameter to be adjusted accurately throughout the stated range. Tightening the screw draws the band evenly around the hose, helping secure it against a compatible pipe, connector or fitting.

Choosing the correct size

Measure the outside diameter of the hose after it has been fitted over the pipe or connector. Select a clip whose adjustment range comfortably includes that measurement. For the most controlled fit, avoid choosing a clamp where the measured diameter sits directly at the minimum or maximum limit.

Suitable applications include:

Vehicle coolant and ventilation hoses
Automotive aftermarket repairs
Agricultural machinery and irrigation equipment
Industrial machinery and compact pipe installations
Workshop servicing and equipment maintenance
Household repairs and general DIY fastening

Use a suitable 7mm socket, spanner, screwdriver or flexible hose-clip driver to tighten the clamp. Apply only the torque recommended for the selected diameter, as excessive tightening may damage the hose, fitting or clamp.

Zinc-protected mild steel is intended for general-purpose environments. For marine, food-processing, oil and gas, or regularly wet and highly corrosive applications, select an appropriate stainless steel Jubilee® Light Range clip instead.

Brand: Jubilee®
Product range: Light Range
Product type: Adjustable worm-drive hose clip
Material: Mild steel
Surface protection: Zinc protected
Adjustment range: 9.5–160mm across the available size options
Band width: 9.3mm
Band thickness: 0.7mm
Screw head: 7mm across flats
Recommended tightening torque: 3.4Nm or 4.5Nm, depending on selected size
Maximum tightening torque: 4.5Nm or 6.0Nm, depending on selected size
Maximum pressure: 17–203 PSI, depending on selected clip diameter
Corrosion resistance: 240-hour neutral salt spray test
Manufacturing standard: DIN 3017
Quality-control reference: SAE J1508 Type FE
Typical applications: Automotive hoses, agricultural equipment, industrial machinery, workshop repairs, pipework and general DIY
Pack quantity: Supplied as stated within the selected product option