Cable Clips, Wire Clips & Cable Fixings

Cable Clips for Home, Office, Trade and Cable Management

Cable clips provide a practical way to route compatible wires, cables and conduit along walls, skirting boards, furniture, panels and other suitable mounting surfaces. The range includes round and flat nail-in cable clips, fixed and adjustable self-adhesive holders, larger two-nail clips and saddle-style conduit fixings.

The correct clip depends on more than colour or overall size. Match the clip to the shape and outside dimensions of the cable, the fixing surface, the installation environment and whether the cable may need to be removed or repositioned later.

Choose Cable Clips by Fixing Method

• Round nail-in cable clips: shaped for compatible round cables such as selected coaxial, data, telephone and electrical cables.
• Flat nail-in cable clips: designed for compatible flat or twin-profile cables where both cable width and height must be checked.
• Self-adhesive cable clips: attach without nails or drilling when used on a suitable clean, dry and stable surface.
• Adjustable cable holders: allow the holder to close around a stated cable or bundle diameter. Check whether the exact design can be reopened.
• Two-nail cable clips: use two fixing points and are available for selected larger cables, ducts, conduit or pipework.
• Saddle and push-in clips: secure compatible conduit or cable to a correctly sized mounting hole or fixing point.

Round and Flat Nail-In Cable Clips

Round cable clips use a curved body intended to sit around a round cable. Flat clips have a rectangular or flatter profile for suitable flat cables. Choosing the wrong shape can leave the cable loose or place unnecessary pressure on its insulation.

Nail-in clips are supplied with an integrated fixing nail or pin. Nail material, length and suitable substrates can differ between products. Do not assume that every nail clip is suitable for brick, masonry, plasterboard, exterior walls or unusually hard surfaces.

The clip should hold the cable without crushing, sharply bending or cutting into it. Never strike the cable or drive the fixing through the cable insulation.

Self-Adhesive Cable Clips and Wire Holders

Self-adhesive cable clips are useful where drilling or nailing is undesirable. They may be used on compatible desks, cabinets, panels, tiles, glass, metal or smooth plastic surfaces when the product instructions allow it.

Adhesive performance depends on the adhesive system, surface material, preparation, temperature, cable weight and the direction of the applied load. A surface described as smooth is not automatically suitable.

1. Check that the mounting surface is compatible with the adhesive.
2. Clean and dry the surface without leaving dust, grease or cleaning residue.
3. Position the clip carefully before removing the protective backing.
4. Press the adhesive base firmly and evenly against the surface.
5. Allow any stated bonding time before inserting or loading the cable.
6. Check the installation periodically, particularly around heat or vibration.

Do not describe a self-adhesive clip as permanent, waterproof, outdoor-safe or suitable for every surface unless those properties are documented for the exact product.

Saddle and Push-In Cable Clips

Saddle clips are designed to support compatible cable, conduit or tubing while allowing an organised installation route. Push-in versions require a correctly sized mounting hole or compatible panel feature.

Check the supported diameter, mounting-hole dimensions, panel thickness, clip material and installation direction. The nominal conduit size does not automatically establish the clip’s mounting-hole or panel requirements.

Push-mount and saddle clips should remain in this department because cable or conduit support is their main function. Cable ties with integrated push-mount heads are better placed in the cable tie mounts and fixing bases department.

How to Choose the Correct Cable Clip Size

• Round cable: measure the outside diameter and compare it with the clip’s documented cable capacity.
• Flat cable: check both the cable width and thickness against the internal clip dimensions.
• Cable bundle: measure the completed bundle rather than adding nominal cable sizes.
• Conduit: match the exact outside diameter or documented conduit size.
• Mounting hole: check the required hole diameter separately for push-in clips.
• Adhesive base: confirm that there is enough clean, flat surface for the complete adhesive pad.

A generic “9 mm” or “16 mm” attribute is not useful unless it clearly identifies the compatible cable diameter, clip opening, conduit size, fixing hole or another specific measurement.

Cable Clips for TV, Data and Electrical Cables

Cable clips can be used to organise selected TV, satellite, telephone, Ethernet, low-voltage and electrical cables when the clip dimensions and installation method are suitable for the exact cable.

Do not assume that one clip size fits every cable described as Ethernet, coaxial or electrical. Cable outside dimensions vary between constructions and manufacturers. Avoid overtightening or flattening data and coaxial cables because changing their shape can affect performance.

Do not work on live electrical systems. Fixed electrical wiring must be installed and supported in accordance with the applicable wiring requirements by a competent person.

Indoor, Outdoor and Fire-Safety Considerations

Colour alone does not establish outdoor suitability. Black, white, grey and brown clips may use different plastics, nails and adhesives, so ultraviolet resistance, temperature range, corrosion resistance and outdoor use must be confirmed for each exact product.

General-purpose plastic cable clips should not be described as fire-rated or compliant with requirements intended to prevent premature collapse unless the complete fixing system has appropriate supporting documentation.

Installing Nail-In Cable Clips

1. Confirm the cable dimensions and select the correct clip profile.
2. Check that the nail and clip are suitable for the mounting surface.
3. Inspect the intended route for concealed cables, pipes and other services.
4. Position the clip around the cable without twisting or pinching it.
5. Hold the nail away from the cable and drive it gradually into the surface.
6. Stop if the clip begins to crush or deform the cable.
7. Inspect the finished route for loose clips, sharp bends and damaged insulation.

Installation spacing depends on the cable, clip, route, orientation and applicable installation requirements. Do not publish one universal spacing figure for the complete department.

Related Cable Management Products

• Use cable ties for bundling compatible cables and lightweight items together.
• Use cable tie mounts and fixing bases when a cable tie must be anchored to a wall, panel or masonry fixing.
• Compare rubber-lined P-clips for suitable cable, hose, pipe and conduit installations requiring a screw-fixed metal clamp.
• Browse the complete DIY fixings range for related cable management and installation products.

Frequently Asked Questions

What size cable clip do I need?

Measure the cable’s outside diameter or its width and thickness, then compare those measurements with the documented internal capacity of the clip.

What is the difference between round and flat cable clips?

Round clips follow the profile of round cable. Flat clips use a flatter or rectangular opening for compatible flat cable constructions.

Are self-adhesive cable clips suitable for painted walls?

Only when the adhesive is compatible with the paint and the paint is firmly bonded to the wall. Removal may mark or lift some finishes, so test an inconspicuous area first.

Can nail-in cable clips be fitted directly into brick?

Not automatically. Nail material and substrate compatibility vary. Some hard or brittle surfaces require a drilled and screw-fixed alternative.

Can cable clips be used for Ethernet cable?

Yes, when the clip fits without crushing, sharply bending or deforming the cable. Check the outside diameter of the exact Ethernet cable rather than relying only on its category designation.

Are plastic cable clips fire-rated?

Only when the exact product has documented fire-performance testing. Ordinary plastic clips must not be presented as fire-resistant cable supports.

Are black cable clips suitable for outdoor use?

Only when the complete clip, fixing nail or adhesive system is documented for ultraviolet exposure, moisture and the expected temperature range.

Can self-adhesive clips be reused?

The cable-retaining part may be re-openable on selected designs, but the adhesive pad normally loses performance after removal. Check the individual product instructions.